$154.95 - $162.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out. - Capacity: 26oz (768 mL) - Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber - Construction (Cage): Carbon Torpedo Cage - Construction (Computer Mount): Nylon Composite - Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 8.4oz (240g)
HSF / AERIA hydration system is designed to seamlessly integrate with the Aeria Ultimate Stem (Stem is required for installation) - combined with the Aeria Ultimate aerobar, this system provides a fully integrated front end “super bike” solution for any bike. This BTA system features the race proven “no splash” fill port, a straw magnet mount for streamlined aero over the top of the system, a bite valve for fluid control and a removable computer mount. - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 30oz (857ml) - Only Compatible With: Profile Design Aeria Ultimate Stem (70mm or 100mm - ONLY) - Weight: 420g
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 35oz (1035ml) - Width: 65mm-140mm (center to center) - Weight: 35oz (470g)
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)
• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
$84.99 - $94.99
A cage that won't slow you down This OCLV carbon fiber cage is so lightweight you'll hardly know it's there. (That is, until you reach down and remove your water bottle with ease.) Recommended for on-road use with small water bottles. - Strong and lightweight OCLV Carbon construction - Secure bottle retention designed for road bikes - Recessed bolts allow smooth bottle transition and better derailleur clearance - Includes lightweight alloy mounting screws - Weighs only 20g
High-performance simplicity. New carbon design leverages the groundbreaking, award-winning design of the Torpedo Kompact 100 for an even lighter weight, sleeker and more rough-road durable hydration system. - NEW unidirectional high-modulus carbon mounting plate - Includes NEW high-grip carbon Raptor Cage, color-customizable to suit your setup - Just add your choice of beverage: Includes hyper-reflective Cool Shot bottle to keep liquids super cool - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubber bands or electrical tape needed to secure system: SecureClip brackets simply clip on and Velcro down to aerobars - On top Garmin computer mount gives quick-glance bird's-eye-view of your cycling data All Inclusive System - Comes with everything you need – mounting plate, Garmin-specific computer mount, cage and bottle No-Fuss Installation - Torpedo Kompact 500 comes fully assembled - No Zip-ties, rubberbands or need to concoct your own mounting solution required – simply click-on and Velcro-down - XLAB SecureClip brackets eliminate rattling and shifting. Fits 22.2mm diameter aerobar extensions. \ - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface (check Compatibility tab for specifics) Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Kit-Match with a Color Customizable Cage: - Color match your bike kit! Insulated Bottle - Hyper-reflective Cool Shot insulated bottle keeps liquids super cool Highest Bottle Grip of Kompact Series - 6 lb grip force is durable for rough road conditions: Carbon anti-launch design increases grip force - Capacity: Includes 20oz (600ml) XLAB COOL SHOT insulated bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 154.4g (without bottle or computer) - Length: 145mm - Bottle Grip Force: 7lbs Construction - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Carbon - Cage: Carbon chassis, polycarbonate RAPTOR TALON cage ends - Brackets: Nylon Composite with Velcro Straps coated with no-slip extension grip
Wind-tunnel testing shows that a bicycle with XLAB's Aero TT Cage and Bottle System on it is 25% more aero than with a round bottle, meaning it will shave up to 20 seconds off a 40K bike leg or time trial. The high grip cage holds the bottle securely, and the non-slip surface with an easy-grip groove makes it easy for you to get the bottle out. The included XLAB 20-ounce aero bottle is BPA-free. - NEW! Stealth black bottle color. Match your black Torpedo Bottle or kit-match your bike! - Carbon cage securely grips bottle - Save up to 64 seconds on Full Race distance - 50% Less Drag than round bottles - Special XLAB Hi-Grip Deep Pocket carbon cage
Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
Profile Design's Aero HC Hydration System sports a sleek, aerodynamic design so you can stay hydrated and hidden from the wind. The bottle features an aerodynamic design and a removable nose so you can easily clean it.The integrated mount places your computer right where you can see it when you're in an aero tuck. With 35mm of width adjustment and independent fore/aft adjustment for the bottle cage, the Aero HC Hydration System is a key part on your aero bike.
Aerodynamic, refillable, on-the-go front mounted bottle strategically positions hydration between the rider's arms for a hidden, sleek, aerodynamic profile. The integrated computer mount efficiently positions electronics. - Flip cap for quick and easy refill and no splash - Aerodynamic shrouded straw mount - Aerodynamic, removable nose aids in the cleaning process - Bracket attaches to the aerobar extensions and offers width adjustment as well as length adjustment - Cage and computer mount are independently adjustable - Aero HC Bottle is also compatible with Basebar Bracket allowing for independent positioning of extensions - Construction: BPA-Free, Foodsafe HDPE Bottle, Injected Nylon/Glass Fiber bracket and computer mount - Width: 85mm-120mm (center to center) - Capacity: 24oz (710ml) - Weight: 248g (System), 138g (Bracket Only)
XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.
A water bottle cage is perhaps the most under-appreciated component on a bike. ENVE's is designed to hold your water bottle no matter the terrain or application. The ENVE Water Bottle Cage is light, durable, and offers easy side and vertical entry. Please drink and ride responsibly. - Weight: 19g
Profile's Axis Karbon Kage is kutting edge! Tipping the scales at just 33 grams, this is one of the lightest cages available. And, the carbon’s fine grip prevents bottle launch no matter where you mount the Kage. Plus, it adds a sweet look to your prized ride!
- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages. - Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. - Can be bent back into shape if damaged, and is available in both titanium and stainless steel
XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.
XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.
XLAB's Torpedo Carbon Cage is designed specifically for their horizontal aero bar hydration mounts. Use with a standard bottle or XLAB's new Torpedo model (mounts and cages sold separately). The cage is made of ultra-light carbon, holds bottles securely and is super easy to use. It features a 5-pound grip force on bottles so they stay put over even the roughest roads.
Having trouble getting your bottle out of your cage? Upgrade to XLAB's Sidekick Carbon Cage! It's specifically designed for use with aero frames, tri bikes and other rigs with small front triangles. Plus, its side-loading design lets you slip your bottle in and out at a comfortable angle so you won't have to struggle with a stuck bottle ever again. It's also crafted from carbon for an impressive weight of only 34 grams. And, it boasts a whopping five pounds of grip force so it keeps bottles in place over even the roughest pavement. - Ideal for fastest frame bottle access and for small frames - Low cut sides for rapid bottle removal and insertion - Wide center opening permits sides to flex outwards for easy bottle withdraw - Special flared entry lip for fast bottle access and insertion - Long thick lower shelf prevents large heavy bottles falling through cage bottom or breaking off tab - Matches XLAB Gorilla cages rear carrier Anti-Launch, and Chimp cages
Fit for fondos, ready for races The carbon construction of the Pro Carbon Water Bottle Cage provides climbers with a lightweight solution that securely holds bottles over train tracks, rough roads, and rocky terrain. Ideal for both road and mountain bikes and available in a multitude of colors to suit your style. - Full carbon construction - Secure bottle retention suitable for road and mountain use - Includes lightweight alloy mounting screws - Available in a variety of colors - Weighs only 29g
The HSF Aerodrink 880 follows in the footsteps of the Aerodrink with updated features. This Front-end hydration system easily mounts between aerobars so you don't have to deviate from the aero position to stay hydrated. - Flexible hose with bite valve - Flip cap for refill port - Secure mounting bracket and easy to remove bottle - Straw can be mounted in either the front or rear - Shape design to improve airflow onto the frame - Bottle Construction: BPA-Free, Food safe HDPE Bottle - Bottle Capacity: 30oz (880ml) - Compatibility: Aerodrink BTA bracket - BTA Construction: Injected nylon/glass fiber construction - Extension Width Requirement: 65mm - 140mm (center - center) - Weight: 289g (System), 130g (Bracket Only)
Made from Toray Japan T700 and T300 carbon fiber using a unique carbon flat lay-up process, the Shuttle Cage XE is an incredibly strong, ultralight, and affordable 3K carbon fiber bottle cage. With two stainless steel bolts included, it's ready to mount and enjoy on your ride. - Fits standard water bottle - Two stainless steel bolts included - Material: Torayca Japan T700 and T300 advanced carbon fiber - Size: 14 x 8.6 x 7.4cm / 5.5" x 3.4" x 2.9" - Weight: 22g / 0.78oz
Low-cost dual carrier with NEW Italian-made cages. Featuring 60% more grip force with an 8lb bottle grip. Includes 2 saddle mounts & 2 Xenon cages. Does not include bag. - Dual bottle system tucks neatly behind your saddle for easy access to hydration - NEW upgraded Italian-made, Xenon cages increase cage grip force by 60% over original model - Mounts low to not hinder your ability to get on and off the bike - First-time rear hydration system buyer? Mounts with a single screw for no-fuss install so you can self-install and quickly get on the road Ideal for first-time rear hydration system buyers - Ergonomically designed so you can easily access the bottle even with limited flexibility - Adjust bottle height by up to 1" to perfectly position to your comfort level Worry-free bottle security - High-gripping Xenon cages tout an 8lbs grip force (approx) – within the ideal range of rear system grip force for worry-free bottle retention Easy storage upgrades readily available - Add an XLAB Mini Bag – a compact storage bag that sleekly mounts between the cages! - Mini Bag easily fits all the essentials for a clincher repair kit – 1 tube, XLAB Air Strike CO2 cartridges, patch kit, XLAB inflator and tire levers - Includes: 2 Mini Wing Cage mounting brackets and 2 XENON Cages - Color: Silver mounting brackets with black cages - Material: 6061-T6 Aluminum mounting brackets. Nylon composite cages. - Cage Grip Force: 8lbs (3.6 kg) approx - Weight: 186g - Warranty: 3 Year Limited Warranty
Keep your hydration right between your arms and your computer at a glance. Easy-to-install system stacks hydration and ride data into one simple design. - Upgraded computer mount takes on rougher road conditions. 3X stiffer than original Kompact 100. - Just add your choice of beverage: Includes calibrated, squeeze-and-squirt Aqua-Shot Racing Bottle - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubberbands or electrical tape needed to secure system: SecureClip brackets simply 'clip on' and Velcro down to aerobars - On top Garmin and Wahoo computer mount gives quick-glance bird's-eye-view of your cycling data - High-grip design holds bottles tight – yet bottle insertion and removal is easy All Inclusive System - Comes with everything you need – mounting plate, Garmin and Wahoo computer mount for Garmin bike computers or multisport watches, cage and bottle No-Fuss Installation, Comes Fully Assembled - No Zip-ties, rubber bands or need to concoct your own mounting solution required – simply clip-on and Velcro-down - Clean, 'snap' on XLAB SecureClip brackets eliminate rattling and shifting - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface, and Wahoo bike computers Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Reversible design easily allows for repositioning if you'd rather pull the bottle towards you than away. - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Easy Glide Cage Design - Specially designed side cutouts enable fast bottle withdraw and entry. Available in black or red Drink Fast with Self-Sealing Nozzle - No need to open bottle nozzle with your teeth. Simply stop squeezing and the nozzle seals itself. - Compatibility: Wahoo and GARMIN-specific - Capacity: Includes 25oz (740ml) clear AQUA-SHOT bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 177g (without bottle or computer) - Length: 145mm/5.7 inches - Bottle Grip Force: 4lbs Construction - Bottle: Clear, lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Aluminum Alloy - Cage: Nylon Composite VULCAN CAGE - Brackets: Nylon Composite with Velcro Straps coated with non-slip extension grip Warranty: - 2 Year Limited Warranty
This rear-mounted hydration system holds two bottles and attaches directly in front of seatpost for easy hydration on the go. - Full angular adjustment allows bottles to be rotated - 6061-T6 aluminum construction - Brackets included to mount two Co2 cartridges - Fits 31.6mm to 27.2mm seatpost with shims (included) - Includes two cages and 6061-T6 Aluminum clamp and extension
The Axis Ultimate Carbon Cage is light, strong, and subtle. - Lightweight - Superior bottle retention - Aerodynamic design - Weight: 20g
Torpedo innovation meets vertical bottle design. Brand new 28-ounce (828mL) hydration system with minimal frontal area. Includes composite mount and clamps, splash-proof lid over quick-fill opening, straw with bite valve, and Hydroblade bottle. All-in-one system for one great price! The Hydroblade is for casual mountain biking with front suspension forks. The most convenient, complete vertical hydration system available. - Safer riding - no reaching down for your bottle - Easily refuels. Simply lift lid and fill using wide mouth, quick-fill opening - Bite valve keeps straw full for quick drinking - Comes complete with easy clip-on clamps for triathlon and TT Bars - Mount the Hydroblade on MTB, fitness, drop or flat bars using the Hydroblade Universal Mount, available separately. - Fits widest range of bars – 80-160mm (center-to-center) Easy to Drink and Refill - Hands-free drinking. Simply sip from the straw, keeping your eyes on the road ahead. - NEW ClickCover! ClickCover designed with grippy pull-tab for opening. Simply pop open and refill via Split Cap. Insert bottle nozzle into aperture for fast, quick refill. - Comes with two cap styles! System also includes highly-acclaimed classic Torpedo Clear Cap. Wide mouth, quick-fill opening also makes mid-ride refill of tablets or powder a breeze. - Top-of-the-line bite valve decreases bloating by reducing air intake when sipping - Flat bottom allows bottle to stand upright on counter when filled Clean, Aerodynamic Design - Computational Fluid Dynamics (CFD) optimized aerodynamic shape to minimize system drag - Flow straighteners molded in for added drag reduction Highly-Acclaimed Megadjust Mounting - Securely adjusts to widest range of cockpit configurations 80mm-160mm (center-to-center) - Accommodates up to 20° of aerobar extension rotation SecureClip Brackets - Clips onto aerobar extensions for a clean bike aesthetic. Eliminates need for extra zip-ties, rubber bands or electrical tape to prevent rocking or tilting - Fits 22.2 diameter aerobar extensions
The No. 9 Side Entry Cage by Whisky Parts Co. melds convenience, form, function, and light weight. It's full-carbon design securely grips your bottle, and side entry cages allow access to your bottle on small frames or when using frame bags.
$39.99 - $49.99 $49.99 Up to 20% Off
The full carbon construction of the RXL Carbon Cage provides climbers with a lightweight solution while the robust design securely holds bottles over train tracks, rough roads, and rocky terrain. Ideal for both road and mountain bikes. Key features: - Full carbon construction - Suitable for road and mountain use - Includes alloy mounting screws - 23g
Page 1 of 7 Next page