Everyone's biometrics are different; no two cyclists should conform to the same TT set up. Comfort (we're talking about power-production) combined with aerodynamics, yields speed. You need the combined forces of both, and to do so you need to find your optimal position, which is why 3T designed their Vola LTD cockpit to be highly adjustable, not to mention light, stiff, and aero. - Narrow, aero-optimized base bars are built with 3T carbon, cutting weight by huge margins - The super-low aero position favored by time trial specialists is possible with extension clamps mounted on the underside of the base bar - Arm pad stack height above the stem center line ranges from 30mm in the low position, to 97mm using all the included spacers in the top-mounted position - Width between the arm pads ranges 220—340mm, measured at pad outer edge - Arm pad reach can be set 20—70 mm ahead of the basebar center, measured at pad front edge - The arm pads rotate in their clamps - A reinforcing bridge is included for rigid, shake-free set-up, that can also double as a convenient computer clamp - Carbon base bar - Carbon 3T Comfort Cradle with neoprene pads - Aluminum aero extensions - Weight: 810 grams in the "low position" - UCI legal
Bontrager's Race X Lite Carbon Aero Bullhorn is light, strong, ergonomic and a great upgrade for your wind-cheating machine. Its hand-made OCLV carbon construction damps vibrations to quash road buzz and trims grams to give you the lightest aero setup possible. This UCI-legal base bar is compatible with Bontrager clip-ons and aero brake levers, and it uses internal cable routing for a slippery, low-drag profile. And, it boasts a 31.8mm clamp diameter for stiffness that kicks in every time you accelerate.
- OCLV Carbon fiber construction - Variable Radius Compact (VR-C) design allows shorter reach and drop - Laser-etched brake lever position lines for spot-on control setup - Go green and save green – Zero packaging means zero waste and zero extra cost
With only 8 hidden marine grade bolts controlling 6 simple points of adjustment, this elegant aluminum integrated aerobar system can easily fine-tune to the millimeter to fit any type of rider. Aeria T2 Aerobars are designed with a lower profile in the wind to create less drag with S-bend extensions for a more race-oriented aggressive ride with lower hand positions. - Aerodynamic Aluminum Wing: UCI Compliant 3:1, aerodynamic aluminum wing has zero drop from clamp to brake extensions. Combined with a shorter reach, this design translates to better control. - Stackable Risers: Slim, sleek risers fine-tune armrest/extension height to get a perfect blend of aerodynamics, power and comfort. - Integrated Bracket: Lightweight, simple and easy to adjust. The patent-pending bracket system simultaneously clamps the extensions while attaching the brackets to the wing. This design yields a smaller profile in the wind, creates less drag, and minimizes corrosion issues from exposed bolts. - F-35i Injected Armrest:3x fore/aft positioning, providing 30mm of adjustment for customized fit. - T2+ Aluminum Extensions: Aeria T2 ships with the race-oriented T2+ Aluminum extension for the most aggressive positioning. The S-Bend extension shape combined with the 30mm rise, provides a variety of low hand placement positions. Tech Specs: - Armrest: F-35i Injected Armrest - Stack: 55mm-135mm (highest stack available of any Profile Design model) - Reach: -60mm, -40mm, -30mm or -10mm with the bracket flipped - Extension Adjustment: 200mm-300mm (T2+ Aluminum extensions) - Extension Drop: 0mm - Width: 42cm (center to center) - Center Clamp Diameter: 31.8mm - Armrest Width: 155mm-203mm - Weight: 850g
The Svet V Base Bar features a low stack height and a deep drop, placing the rider in a low, aggressive steering position when out of the aerobars. - Multi-direction, multi-layer carbon fiber construction - Two-Way Fit System: Aggressive fit in standard position. Flip the base bar for a more elevated position - Straight Brake Extension: Help maintain control while remaining aerodynamic - Clean Cable Routing: Pre-slotted for internal cable routing. Di2 compatible. - 3:1 wing section with zero drop
T2 Plus Carbon Aerobars are designed for race-oriented riders looking for more aggressive ride positioning. The T2+ Carbon extension provides an S-Bend with a molded grip offering ergonomics while maintaining aerodynamics. Anchored by the J5 bracket with the streamlined Inline Compression Clamp (ICC), this bar provides single bolt extension adjustment so dialing in your fit is simple and easy. The updated offset bridge matched with the F40tt armrest gives the system enormous range of reach and width adjustability. For additional integration an optional BTA bridge is available. Tech Specs: - Bracket: J5 Bracket - Armrest: F40tt - Stack: 55mm – 125mm (w/Aftermarket Riser Kits) - Reach: -9mm – -77mm (7.5mm Increments) - Width: 155mm – 296mm (Center to Center) - Extension Length Adjustment: 215mm – 316mm (Center of Basebar to Tip) - Extension Length: 357mm - Extension Height: 41mm - Extension Angle: 0-degrees - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 585g
T3 Plus Carbon Aerobars with ergonomic drop-bend extensions allow for the widest variety of hand positions for individual comfort. The revised T3+ Carbon extension brings improved electronic and mechanical shifting cable management to this innovative wrist relief bend. Anchored by the J5 bracket with the streamlined Inline Compression Clamp (ICC), this bar provides single bolt extension adjustment so dialing in your fit is simple and easy. The updated offset bridge matched with the F40tt armrest gives the system enormous range of reach and width adjustability. For additional integration an optional BTA bridge is available. Tech specs: - Bracket: J5 Bracket - Armrest: F40tt - Stack: 55mm – 125mm (w/Aftermarket Riser Kits) - Reach: -9mm – -77mm (7.5mm Increments) - Width: 155mm – 296mm (Center to Center) - Extension Length Adjustment: 229mm – 335mm (Center of Basebar to Tip) - Extension Length: 376mm - Extension Height: 66mm - Extension Angle: 40-degrees - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 575g
T2 Plus Aluminum Aerobars are designed for race-oriented riders looking for more aggressive positioning. The S-Bend extension places the hands low, while the 30mm rise allows for a variety of comfortable hand positions. Includes F-19 anatomic armrest. - Aggressive positioning for Time Trial or Triathlon - 6061-T6 Aluminum construction; shot peened with anodized finish - F-19 adjustable anatomic armrests with 4 position fore/aft adjustment to dial in the fit, and Velcro-backed EVA foam pads that affix directly to armrest without straps - Highly adjustable J2 brackets for a lower armrest position that adjust in both length and angular rotation for a customized fit - Dual cable routing hole Tech specs: - Bracket: J2 Bracket - Stack: 60mm-120mm - Reach: Max Aft -180mm, Max Fore 70mm - Extension Adjustment: 180mm-270mm (c of basebar-end) - Width: 145mm-300mm (center to center) - Center Clamp Diameter: Fits 26.0mm and 31.8mm bars - Color: Anodized Matte Black - Weight: 500g
V2 Plus Aerobars with S-bend extensions offer a higher rise for comfort and reduced fatigue in the aero position. The aerobar features a low stack armrest position and forged bracket system that places the extension below the basebar. - F-19 adjustable anatomic armrests with 4 position fore/aft adjustment to dial in the fit, and Velcro-backed EVA foam pads that affix directly to armrest without straps - L1 Brackets: 6061-T6 Aluminum forged bracket system designed to place the armrest at the lowest stack possible and the extensions underneath the basebar Tech specs: - Extension: V2+ Aluminum - Stack: 35mm - Reach: -90mm, -75mm, -60mm, -45mm - Width: 150mm - 305mm - Extension Adjustment: 175mm – 130mm - Clamp: Fits 26.0mm and 31.8mm bars - Weight: 490g
Profile Design's ZBS S-Bend Clip-on Aerobars are made of light and durable 6061 aluminum and feature their ZBS brackets that provide a low arms position so this design is great for aggressive time trial and triathlon riding positions. It also boasts their F-19 adjustable anatomic armrests.
ADL Aerobars are adjustable with an integrated bracket design. They can be flipped in either left or right direction to use with or without armrests. - Clamp style and three position F-35i injected armrest provide and adjustable road specific fit - Fits both 26.0 and 31.8mm basebars, shims included - Stack: 37mm-97mm - Armrest adjustment 20mm fore/aft - Reach: -60mm, -40mm, -30mm - Extension Adjustment: Fixed - Width: 165mm-320mm (center to center) - Weight: 420g
The drag-defying profile of Bontrager's Elite Aero VR-CF Handlebar is proven to save up to 23 seconds per hour over a traditional round handlebar. Take advantage of the shaped 6066-T6 aluminum and internal routing, and bring your ride's aerodynamics to the next level. - Custom-butted, 6066-T6 alloy construction - Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions - Compatible with clip-on aero bars - Aero drop bar profile is more aerodynamic compared to traditional round bars - Internal cable routing for Di2 and standard housing - Laser-etched brake lever position lines for spot-on control setup - UCI compliant
Ergonomic Legacy II Aerobars feature extensions that provide a variety of hand positioning, and width and rotational armrests with a high stack to achieve a relaxed ride position. Ideal for riders that need extra positions for Centuries. - Injected Venturi Armrest and ZB Bracket - Forged 6061-T6 construction with armrest made of injected nylon and glass fiber - Fixed extension adjustment - Extension angle 44 degrees with 58mm rise - Fits both 26.0 and 31.8mm basebars, shims included
The Zipp Vuka Alumina, crafted from 6066 series aluminum, offers a base bar with superior aerodynamics and ergonomics at an affordable price. - Handgrips are angled upward by 5 degrees for a natural wrist position when climbing or sprinting - Sleek with clean internal cable routing for easy installation
Profile's Stoker 26 Base Bar features a 26.0mm diameter the entire length across the bar, allowing the widest aero bar clamping area that Profile makes. This makes the bar ideal if you have a wide aero position or need a comfy stoker bar for your tandem. Made from double-butted 6061 aluminum, the Stoker 26 is light, not to mention shot peened and anodized for added strength and durability. Plus, it's pre-drilled for internal cable routing for aerodynamics and a clean look.
Page 1 of 1