Pedals

Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 320g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

BREAKTHROUGH POWER Built on the cutting-edge SPEEDPLAY pedal platform, POWRLINK ZERO delivers reliably accurate power and cadence data in a race-proven pedal system. This powerful combination creates an unrivaled power pedal that helps cyclists optimize performance to break through to the next level. A POWERFUL COMBINATION POWRLINK ZERO combines proven sports science and years of industry-leading research with the superior adjustability, increased power transfer, reduced weight, and enhanced aerodynamics of the SPEEDPLAY platform to create a pedal system that delivers a distinct performance advantage. BETTER YOUR BEST Accurate to +/- 1%, POWRLINK ZERO’s internal gyroscope removes cadence variation to measure power output more precisely. Combined with Wahoo’s sports-science based algorithms, cyclists get accurate values they can use to achieve next-level performance gains. LASTING POWER POWRLINK ZERO is made with premium materials for superior strength-to-weight ratio – making it perfect for enduring efforts. In addition, the rechargeable battery lasts up to 75-hours per charge to give you the power to go long. Really long. In the box - Left and Right Power Pedals - Washer (x2) - Cleat Assembly - Screw Packet - Charging Cable and Clips - Quick Start Guide - Important Product Information Guide Additional Tools Required for Assembly: #1 and #2 Philips Head Screwdriver and 8mm Allen Wrench"

BREAKTHROUGH POWER Built on the cutting-edge SPEEDPLAY pedal platform, POWRLINK ZERO delivers reliably accurate power and cadence data in a race-proven pedal system. This powerful combination creates an unrivaled power pedal that helps cyclists optimize performance to break through to the next level. A POWERFUL COMBINATION POWRLINK ZERO combines proven sports science and years of industry-leading research with the superior adjustability, increased power transfer, reduced weight, and enhanced aerodynamics of the SPEEDPLAY platform to create a pedal system that delivers a distinct performance advantage. BETTER YOUR BEST Accurate to +/- 1%, POWRLINK ZERO’s internal gyroscope removes cadence variation to measure power output more precisely. Combined with Wahoo’s sports-science based algorithms, cyclists get accurate values they can use to achieve next-level performance gains. LASTING POWER POWRLINK ZERO is made with premium materials for superior strength-to-weight ratio – making it perfect for enduring efforts. In addition, the rechargeable battery lasts up to 75-hours per charge to give you the power to go long. Really long. In the box - Left Power Pedal and Compatible Right Pedal - Washer (x2) - Cleat Assembly - Screw Packet - Charging Cable and Clips - Quick Start Guide - Important Product Information Guide Additional Tools Required for Assembly: #1 and #2 Philips Head Screwdriver and 8mm Allen Wrench"

- Carbon body and new design creates a more powerful structure to transfer power from the cyclist to the road. - Power transfer and stability are also improved with a larger pedal surface area of 725mm - The ICLIC system has been redesigned to allow for a more positive engagement and to be more comfortable. - Watt-saving CeramicSpeed bearings and super-light hollow titanium spindle - 87.3 grams per pedal - The carbon blade is also adjustable in 3 positions to optimize engagement tension. - Maximum rider weight of 90kg. Specs: - Pedal Material: Carbon - Pedal Weight: 87g - Cleat Compatibility: ICLIC - Spindle Material: Titanium - Pedal Bearing: Ceramic - Pedals Thread: 9/16"

Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and they feature 6-degrees of knee-friendly float. The Eggbeater 11s boast titanium axles, wings, and bodies, stainless-steel springs, and inner needle bearings. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability and consistently smooth pedaling.

Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.

The Speedplay Nano is a featherweight, dual-sided road pedal that lives up to the demands of sprint finishes, categorized climbs, and tough training sessions. The mix of premium titanium and carbon fiber materials creates a lightweight but strong pedal that will hold up and deliver speed on the breakaway. The integrated cleat system with 3-axis adjustability allows you to precisely dial in your fit for optimized biometrics and increased power transfer. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimze fit and enhance performace through better biomechanics. Designed with the same level of focus and dedication it takes to earn a spot on the podium, Nano is a purpose-built, ultralight pedal that utilizes the proven Speedplay platform to offer every advantage come race-day. - Weight: 168g (per pedal pair) - Spindle Material: Titanium - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all. - Titanium wings to reduce weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 6 adjustable pins per side for grip - Traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - 52mm q-factor for maneuverability on tight trails - Hex alloy endcap for durability - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system

The world’s most successful downhill pedal is now available in a premium edition featuring titanium wings and dual-chamfered edges to minimize weight and maximize performance. The Crank Brothers Mallet DH 11 is designed and engineered for the rider who wants the best of the best, and nothing less. - Titanium wings for reduced weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Spindle material: forged SCM 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: 6AL/4v titanium - Spring material: 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type: IGUS LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Endcap hex alloy - Cleat: Premium brass cleats with shims included - Weight: 445 grams

- Titanium axle and carbon body. - Tension adjustment to fine-tune how the pedal functions - Easy and consistent engagement and an open design that clears debris each time you step in. Specs: - Pedal Material: Carbon - Pedal Weight: 124g - Cleat Compatibility: ATAC - Spindle Material: Titanium - Pedal Bearing: Ball bearings - Pedals Thread: 9/16''

- Carbon body and titanium axle. - Power transfer and stability are maximized with a large, 725mm surface area. - Bottom fairing to improve aerodynamics and protect the carbon blade. - TIME's patented preopened ICLIC system allows for fast and easy cleat engagement. - Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. - Maximum rider weight of 90kg. Specs: - Pedal Material: Carbon - Pedal Weight: 94g - Cleat Compatibility: ICLIC - Spindle Material: Titanium - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

Size-specific, premium concave platform pedal provides optimal shoe/pedal interface. - Titanium spindle for weight reduction - Optimal surface area - Minimal profile: 11mm-13mm thin - Concave platform for secure foothold - 10 adjustable pins per side for grip - Premium bearings and seal system - Stamp Small: Recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp Large: Recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Spindle material 6AL/4v titanium - Body material: 6061-T6 aluminum - Footprint: 100mm x 100mm (Small)/114mm x 111mm (Large) - Weight: 299 grams per pair (Small)/325 grams per pair (Large) - Adjustable pins 10 per side

- Developed for the demands of professional Enduro racing, the SPECIALE 12 is made of a 6106-T6 aluminum - A wide platform, adjustable pins for optimal grip, and a micro-adjustable clamping system combine to exceed the demands of the most advanced riders. - TIME's renowned engagement system allows easy engagement with a positive, predictable entry and release, as well as a design that self-cleans even in the most difficult conditions.

- Excellent Pedaling Efficiency - Optimized Balance Of Weight And Rigidity - Injection Molded Carbon Composite Body - Hollow Cleat Bolt - Efficient Power Transfer - High Stability - Extra-Wide Platform - Efficient Power Transfer/Durability - Reduces Flex And Pedal Body Wear - Stainless Steel Body Plate - Excellent Pedaling Efficiency - Smooth Rotation - 2-Ball Bearing, 1-Wide Roller Bushing - Reliable Durability Performance - Stable And Uniform Load Distribution - Wide Bearing Placement - Rider Tune - Customize The Entry And Release Tension Settings - Adjustable Entry And Release Tension Settings - Shimano 3-Year Limited Warranty - Average Weight: 224g - Shimano SPD-SL cleats included - Standard (52mm) - Wide (56mm)

Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs. - Weight: 224g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 39º - Bearing: Sealed

Ride with rage without compromising safety. This is what best defines the X-TRACK EN-RAGE, our top-of-the-line enduro pedal. The PLUS Ti model features a titanium axle for added strength and improved stiffness all while shaving grams. The wide, forged aluminum body on all PLUS models will increase stability and support across the most challenging terrain. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Forged Aluminum - Spindle: Titanium - Platform area: 664mm² - Platform width: 67mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 200g - Weight (pair + cleats): 450g - Float angle: 6° - Release angle: 13°

The ceramic bearing and famous BLADE technology transfers 100% of your power input to the drivetrain, making the KEO BLADE CARBON CERAMIC pedals a great choice. With the wide, 700mm² contact area, your foot will become one with the pedal, as you become one with your bike. - Technology: Blade - Cleats: Keo Cleat - Retention: Serial installed in 12 + additional 16 in box, 20 sold separately - Body: Carbon - Blade: Carbon - Spindle: Chromoly+ - Bearings: Ceramic - Platform area: 700m² - Platform width: 57mm - Q Factor: 53mm - Stack height + cleats: 14.8mm (8.5mm + 6.3mm) - Weight (pedal): 110g - Weight: (pair + cleats): 290g

Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 292g Ti - Body: 60661 CNC AL - Spindle: Titanium - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float) *Titanium spindles have 180lbs weight limit.

Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.

Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)

TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.

Based around SPD technology, DMR has engineered an extremely adaptable caged-clip system with the V-Twin. These pedals offer a number of different grip and feel options by utilizing a range of pins paired with a unique nylon "bumper" and metal shim feature. - Large, extruded and CNC'd aluminum platform cage - SPD-compatible design with 5 degrees of float - Nylon 'bumper' and steel sizing shims customize platform feel - Serviceable bearing system - 7 tuneable pins per side (full set supplied) - 4140 chromoly axles - Anodized finish - 9/16"

When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. LARGER CONTACT AREA - The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

- Power transfer and stability are maximized with a large, 725mm2 surface area. - Bottom fairing to improve aerodynamics and protect the carbon blade. - TIME's patented preopened ICLIC system allows for fast and easy cleat engagement. - Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. - Hollow, stainless steel axle. Specs: - Pedal Material: Carbon - Pedal Weight: 113g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

Competition-oriented and customizable for refined fit, feel, and power transfer. Details - Durable alloy body - Durable cast steel wings - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - Hex alloy endcap and bashguard - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system Specs - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 52mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 320g per pair - Wing Material: 17-4PH stainless

Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams

The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Adjustable Pins: 6 per side - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 57mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 424g per pair - Wing Material: 17-4PH stainless