Grips

- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 30 - Weight (g): ±115g / Pair

- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 33 - Weight (g): ±115g / Pair

Spoon Grips have an incredibly slim, low profile design and grip pattern, yet remain reasonably comfortable due to a special tacky rubber compound. Double locking alloy rings keep them secure in any conditions, and soft plastic end plugs protect you from barends. Need the confidence of locking grips without the high price, try a set of Spoons! - Micro diamond pattern tacky rubber grip - Two anodized alloy lock ring clamps - Length: 130mm - Diameter: 30mm - Weight: 110g/pair - Plastic end cap included

All the quality and performance of SPANK's SPOON grips, in a new 100mm length specifically designed for kids. One of the most common complaints of young riders is that adult grips position their hands too far from the controls, making them move their hands around while riding, or risk pinching fingers in brakes. The new SPOON Grom grips alleviate this issue, putting their hands in the right place every time, and allowing them to set up their handlebar controls just like dad! Material: Tacky rubber, alloy clamp rings Length (mm): 100 Diameter (mm): 30 Weight (g): ±95/set Features: Tailored to fit children's hands; two anodized alloy clamp rings; plastic safety end plugs; micro diamond pattern

Salsa's Backcountry Grips are constructed of sticky, durable, supple rubber and are sized for comfortable use with or without gloves. - ADV BY BIKE text blocks sized for comfort with or without gloves - 143mm overall length

Salsa's Backcountry Lock-On Grips provide confidence, comfort and style. They feature sticky rubber that's tapered up towards the lock-ring for a sure-fire grasp, a single-sided lock-on collar and they're sized for both glove and non-glove use. - ADV BY BIKE text blocks sized for comfort with or without gloves - Single-sided lock-on collar - 134mm overall length including the locking collar - Grip tapers up towards the lock-ring for comfort and security - Only Compatible with Salsa Lock-on Collars

- Grip tapers up towards the lock-ring for comfort and security - Single-sided lock-on collar - 134mm overall length including the locking collar - Only Compatible with Salsa Lock-on Collars - Grip only, no lock rings. - For replacement use

These foam fatties measure 33mm in diameter and feature a high-density foam construction around an inner plastic sleeve with single-sided aluminum lock-on collar. Great for winter riding.

- Closed-end design protects end of handlebar while looking good - Compatible with Salsa Backcountry Grips only - 30g for pair

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.

SRAM's Locking Foam Contour Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

SRAM's Locking Foam Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

SRAM's Locking Grips have clamps on both ends for a secure bar hold. Their rubber surface and "S" logo design offer a great feel.

• Replacement locking handlebar grip sets for X0 and XX Grip Shift • Available in 100mm and short length 85mm shifter with interlocking Grip Shift interface and single bolt clamp. • Available in full-length 122mm grips with dual locking bolt clamps. • Available in black and silver.

• Replacement locking handlebar grip sets for XX1 Grip Shift • includes one 100mm right and one 122mm left grip • Available in black or silver.

SRAM Racing Grips offer a great grip for total control and come in several sizes to fit your front-end setup. These durable rubber grips have stylish logos stamped in them and are built to last and not slip.

- Clear, gel pads provide added shock absorption while positioned between the lever hood and top-handlebar transition under handlebar tape - Two, left and right sets with integrated channels for either inside or outside, under tape cable routing

- 1-piece, integrated Lock-On grip. - Exclusively fits 19mm bar ends. - Dual Density Design. - Smaller 25-26mm outer diameter. - Smaller 115mm length. - Tapered and slotted core to eliminate slippage. - Plush SDG Icon pattern for superior grip control and vibration dampening.

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

The TwistLoc remote and grip set maximizes efficiency and space, while keeping your hands safely on the bar. Twist to lock, push the button to unlock on forks, rear shocks or both in tandem. - Curved “CRVD” vs. and straight “STRT” cable options (see photos for reference) - Encouraged for XC, Trail, and Enduro usage - Easy action - Twist to lock, push button to release - Fixed grips included

Experience more comfort and confidence on your next mountain bike ride with the lower-profile Ritchey Comp Truegrip X grips. - Single-density, non-slip Kraton rubber - Ergonomically designed with molded and raised TR logos - Closed end design - 30mm diameter - 106g/pr

Ritchey Truegrip X Locking mountain bike grips are comfortable and lighter-weight dual-density grips that lock to the handlebar.

Hold onto the lightweight WCS Ergo Mountain Bike Grips for a comfortable and impressive mountain bike experience. - Material: HD foam - Density: single - Shape: hexagonal/ergo - Locking: no - Ends: open - End-plugs: included - Length: 128mm - Diameter: 36mm - Weight: 36g (w/o plugs)

For long days on the trail, Ritchey WCS Ergo Locking mountain bike grips are specifically shaped to relieve stress on the hand while locked down on the bar to reduce slippage. - Material: HD foam - Density: dual - Shape: hexagonal/ergo - Locking: dual-side - Ends: open - End-plugs: included - Length: 129mm - Diameter: multiple - Weight: 133g (w/o plugs)

Ritchey WCS Python Trail Grips. The heart of these new grips is Tom’s patented Python self-tightening helical core design. With a spiral inner grip surface designed to literally constrict around the bar the instant that the grip starts to twist, the Python grips ensure no slippage in even the most gnarly conditions. Fastened into position with an integrated lock ring, the ergonomically shaped Python grips also feature tripledensity Kraton rubber that provides welcome support for your hands.

The slender WCS Truegrip mountain bike grips deliver a lightweight, comfortable, and faithful ride experience out on the trails. - Material: HD foam - Density: single - Shape: hexagonal - Locking: no - Ends: open - End-plugs: included - Length: 130mm - Diameter: multiple - Weight: 43g (w/o plugs)

- 4 compounds: medium, soft, super comfort (extra-soft) or Kevlar version with suspended Kevlar particles for the ultimate tacky yet durable grip - Machined 6082 aluminum collars lock tightly with integrated grip core - 30mm outer diameter knurled grip

Tired of numb, painful hands? The Cruise Control Drop Bar Grip System gives you the ultimate in control and comfort on your road or gravel bike. Instead of riding all day holding a round metal tube, you'll have multiple ergonomic positions designed to eliminate the high pressure zones that have you shaking your hands out every mile. Together, the Top Grip and Drop Grip offer a complete ergonomic upgrade that fits almost any drop bar on the market. So go ahead, take the long way home. Combine with the Kitchen Sink Handlebar and Really Long Bar Tape to take things to the next level. Benefits: - Ergonomic pad shaping eliminates hot spots which can lead to hand pain, numbness and tingling - Kraton rubber filters road buzz - Multiple grip options let you customize your handlebar for the perfect fit Details: - Top Grips attach to the bar underneath the tape to provide a larger, ergonomic hand position on the tops of your bars. - Drop Grips go over the end of the bar, giving you a comfortable drop position with quick access to the brake levers. Compatibility: - Compatible with standard drop bar handlebars - Top Grips are installed directly on the bar, before bar tape is applied, so you may need a fresh roll of tape. Did we mention our Really Long Bar Tape works great, especially for wider bars?